Studydroid is shutting down on January 1st, 2019



keywords:
Bookmark and Share



Front Back
(1)Before start flow:
Passenger/Crew Brief..........Complete
Airport Diagram.......Review/keep available
Fuel Selector Valve...........Both
Fuel Shutoff Valve......... On(In Fully)
Mixture Control........Idle Cut-Off
Throttle..........Open 1/4"
Stby Batt Switch...........Test/Arm
[Hold in test for 20 seconds (verify green test light stays illuminated), then ARM (Verify PFD initializes)

if failed continue checklist w/ start engine after completeing before takeoff run-up test again with alternator and master switches off
Engine Indicating System.......Check
Bus E Volts(24 volts minimum)....... Verify
M Bus Volts (1.5 volts or less)...........Verify
Batt S Amps(discharge[-])....... Verify
Stby Batt Annunciator.......... Verify On
Panel Lights................ Off(On)
Flashing Beacon/Lights.........On
Circuit Breakers.............In
Parking Brake.............Set
Seatbelts/Harnesses...........On
Before Start checklist...........Complete
x of y cards