13 Best Harmonics Flooring Installation Kit of 08 2022

Pro pull bar for vinyl plank, laminate and hardwood flooring installation

The short end is thinner than usual pull bars to fit tight spaces against a wall

Made of manganese steel that is tough and durable

Used to pull planks together of tongue and groove

For use with a mallet

✅Reinforced Mallet: Constructed of cast iron with bright chrome plating, the hammer is equipped with the hardness of 90±5 HAS. The double-faced solid PVC head delivers a softened, positive strike. The mallet head is 1-3/8 inch in diameter. The handle is made of American hickory which is lightweight but tough. The whole mallet is 10-3/4 inch long and weighs 1.036lb.

✅Enhanced Pull Bar: Made from premium A3 steel with matt coating, the pull bar designed with enhanced strength and corrosion resistance. The pull bar is 12-1/4 inch long and 1-1/8 inch thick, which is superior to the normal design. The soft pads on the back can well protect the floor from scratch.

✅Solid Tapping Block: The tapping block made from of polypropylene is designed solid, which is more sturdy and durable. The approximate size of the block is 7-7/8 x 2-1/2 x 3/4 inch.

✅30-Piece Spacers: The kit comes with 30 pieces plastic spacers which are designed with non-slip slots. The approximate size of the spacer 2-3/8 x 1-1/8 inch.

✅The kit is perfect for domestic and professional use for laminate or hardwood flooring with guaranteed quality. You are always welcomed to contact us for warranty service whenever there is any problem with the product.

High-strength fiberglass handle mallet with non-slip rubber grip help absorb vibration. Double-faced solid rubber head delivers a softened, positive strike. The mallet head is 40 mm in diameter(other brands usually is 25mm).No any issue about the head of mallet fell apart and handle bent

12.2 inch long, 4.5mm thick Upgraded pull bar is more longger and thicker than others.Others are usually only 3 mm thick, 10.5 inch long and easily deformed

40 spacers included. Allow you to install your laminate wood flooring more convenient and easier

Suitable for 0.27in (7mm) - 0.6in (15mm) laminate or hardwood flooring

Package included 1 x rubber hammer; 1 x pull bar; 1 x tapping block; 40 x spacers

High-strength fiberglass handle mallet with non-slip rubber grip help absorb vibration. Double-faced solid rubber head delivers a softened, positive strike. The mallet head is 35 mm in diameter(other brands usually is 25mm).No any issue about the head of mallet fell apart and handle bent

Upgraded pull bar is more longger and thicker than others.Others are usually only 3 mm thick, 10.5 inch long and easily deformed.Ours is 4mm thick, 12 inch long is heavy duty

Suitable for 0.27in (7mm) - 0.6in (15mm) laminate or hardwood flooring

REXBETI flooring installation kit have 40 spacers, more than other brands.Let you install your laminate wood flooring more convenient and easier

Package included 1 x rubber hammer; 1 x pull bar; 1 x tapping block; 40 x spacers

✅【Floor Installation Kit】Complete tool kit contains all the essentials you need, making your installation more convenient and easier. Package included 1 x heavy duty pull bar, 1 x vinyl rubber tapping block, 1 x double faced hammer, 1 x protective foam keen pads and 60 x wedge spacers.

✅【Solid Rubber Hammer】High-strength fiberglass handle mallet with non-slip rubber grip help absorb vibration. Double-faced solid rubber head delivers a softened, positive strike and the mallet head is 35 mm in diameter.

✅【Enhanced Pull Bar & Tapping Block】Extra thick high strength steel made pull bar designed with 3'' wide front edge and felt pads at back help to prevent damaging and scratching your plank during installation. Premium vinyl rubber made tapping block can support highly intense flooring installation task. Suitable for 0.27in (7mm) - 0.6in (15mm) laminate or hardwood flooring.

✅【Excellent Protection】Provide comfortable and waterproof foam kneecap offer true knee support and protection while kneeling on hard and slippery surfaces. Make your work will be easier and more comfortable.

✅【More Wedge Spacers】60 x wedge spacers are included to facilitate flooring installation of large flooring area. The spacers have “serrated” edges that lock them into the correct position once a board is placed against them.

40 mm 20oz double-headed rubber mallet is more heavy duty for your flooring installation

Upgraded pull bar is 4mm thick, 12 inch long.The end of pull bar where connected to the wooden floor is widened, will not damage the floor

40 spacers let you install your laminate wood flooring more convenient and easier

Suitable for 0.27in (7mm) - 0.6in (15mm) laminate or hardwood flooring

1 x durable upgraded tapping block; 1 x heavy duty mallet; 1 x widen pull bar; 40 spacers

For Installing Tongue And Groove Flooring

Extra thick, 3"W

For use with Glue Down And Floating Flooring

Includes (30) Spacers, (1) Tapping Block, (1) Pull Bar

Pull bar is ideal for use in tight spaces, such as against a wall

Use the wedge spacers to create a perimeter expansion gap when installing laminate and other floating floors

[ADJUSTABLE AND LOCKING FEATURE] - With an adjustment tool, you can adjust the tightness of the contour gauge according to your needs. This upgraded contour gauge is lockable for the accurate fix, helping you duplicate and transfer the shape accurately to anywhere you need.

[PRECISE SHAPE DUPLICATION] - Kovadon contour gauge has high precision and the single needle down to 0.06 inch, which can provide you with more accurate data. You don’t need to copy the line on the paper and transfer it anymore.

[PREMIUM ABS MATERIAL] - Constructed of high quality, tough, durable plastic ABS plastic for strengthening. The material of the core parts of the contour gauge is aluminum alloy and flexible use. Will not damage or scratch the original object.

[EASY TO USE] - Simply push the contour gauge against the object to match the contour and then lock the shape. You can easily copy and transfer the shape you want. With both inch and centimeter-scale contour copier.

[EXTENSIVE APPLICATION] - The contour Gauge designed for winding pipes, circular frames, ducts, and many objects, Ideal for fitting tiles, laminate, carpet, checking dimensions, molding, etc. A useful tool for operations on car bodies, carpentry, and all kinds of modeling.

Gently pushes the tongue and groove or edges of resilient vinyl tile, laminate or hardwood flooring planks together creating a tight seam

Unique combination edge design for use with most types of flooring

Durable polypropylene body is built to last

Use with a mallet only

An ideal tool to install your laminate wood flooring faster

Suitable for 7-15mm(0.28-0.59") laminate/hardwood flooring

Upgraded tapping block to install countless flooring

1x upgraded tapping block, 1x pull bar, 1x double headed mallet, 30x spacers

Complete tool kit contains all the essentials you need, making your installation more convenient and easier