The 16 Best High Temperature Duct Tape in 2022 Compared & Reviewed

Thicker Foil Duct Tape: Steelsoft aluminum duct tape in 3.6 mil foil thickness, NOT including backing paper(3.1 mil), is the stronger than common 2.0, 2.4 and 3.2 mil on market.

Easier Peel Off Backing: Due to Thicker foil and paper, our aluminum tape is easier to be peeled off from edge. The aluminum adhesive tape will not be crinkled and curled on itself, easier working and save your time! Small roll will not be messed up and tidy to manage!

More Sticky: Steelsoft ac duct tape is made of thick aluminum foil and high quality acrylic glue, more sticky and stable under low and high temperature condition(-20 C to 130 C), UV, moisture and heat resistant, suitable for indoor and outdoor, cold and hot air duct insulation.

Save Money: Our aluminum foil tape 2 inch x 13 yards(39 feet) is a cost-effective length for dryer vent, AC unit, ductwork insulation, heat reflective, furnace, hot water heater and metal repair etc. There is no a big roll to be left and laid aside.

Good Packaging: Steelsoft provides each roll foil tape with a strong carton box so that the foil surface is not crinkled, more beautiful, smooth and better sealing performance!

Professional / Industrial Grade: High-quality, high tensile strength aluminum foil coated in epoxy resin with strong, cold-weather solvent acrylic adhesive set on a easy-release silicone paper liner to preserve the adhesive and provide ease of use

Wide Variety Of Uses: Ideal for an array of uses, including general repair, sealing hot and cold air ducts (excellent HVAC tape), duct insulation systems, sealing aluminum, stainless and plastic seams / joints, temporary repair of metal surfaces, copper pipe fixing, etc.

Holds Up: Designed to resist flame, moisture / vapor, UV degradation, odor, weather and smoke transmission. Excellent for both indoor and outdoor use. Chemically resistant, thermally conductive (helping cooling/heating efficiency), heat and light reflective

Sticks To Virtually Anything At High And Low Temperatures: Our aluminum foil tape provides a durable bond at low and high temperatures. Conformable backing and pressure sensitive adhesive means it is designed to adhere properly to a variety of smooth and irregular surfaces

Lots Of Tape Means A Great Value: 1.9 inches wide x 150 feet (50 yards). 1.7 mil foil and 1.7 mil backing. Performs from -20 F to 220+ F. Ensure that surface is clean, dry, free of grease, oil or other contaminants before applying aluminum tape

Heat resistance: the hot pressing tape can withstand high temperatures up to 280°C (536°F), they can protect the surface of products well in paint, soldering, ironing and other products; This is also a sublimation tape that can be applied for hot pressing, it is indispensable for sublimation

Wide range of applications: this kind high temperature heat-resistant tape is an indispensable product under high-temperature working environment, including circuit components, oven tin stoves and lithium batteries, providing more convenient for you

Reliable material: the heat press tape is made of polyimide film and silicone adhesive, with smooth surface and high insulation, the strong organic silicone adhesive is easy to adhere, and there is no residue after peeling

Product specifications: the length of each tape is about 108 feet/ 33 m, its width is for you to choose ; The color is mainly blue, appropriate product specifications can make you more flexible, convenient and free to use the project in different occasions

Package includes: you will get 6 rolls of blue high-temperature heat-resistant tapes, sufficient quantity can meet your different needs, when you use it, you can also cut it to suitable size according to your needs

VAPOR SEAL TAPE: 2. 0 mil aluminum foil backing (4. 0 mil total thickness) with a strong, pressure sensitive acrylic adhesive is ideal as a vapor seal tape for duct closure.

HOT AND COLD TEMPERATURES: Combination of a foil backing and acrylic adhesive gives this tape a superb operational temperature range of -40F-300F (-40C-149C).

EASY RELEASING LINER: Poly coated Kraft paper liner protects the adhesive and keeps the tape ready for use.

LONG LASTING: The foil backing serves as an excellent barrier against moisture, dust and many chemicals - making it strong, durable and long-lasting.

APPLICATIONS: Heating Ventilation Air Conditioning (HVAC), duct closure, vapor seal on reinforced fiberglass duct board, rigid fiber glass duct board, flexible air ducts and air connectors.

Listed for both UL181A-P and UL181B-FX

REAL PROFESSIONAL GRADE GAFFERS TAPE – This tape is what the pros use. It is industry standard, premium grade gaffer tape and MADE IN THE USA. We did not compromise on quality. better than duct tape – Never tried gaffer tape? Try it once and you’ll see for yourself. Does what duct tape can do without leaving a mess.

YOUR GEAR, CABLES AND SURFACE ARE SAFE AND INTACT – Whatever you use Gaffer Power on, it holds it down solid but is very easily taken off, leaving no stickiness or residue. The adhesive will not peal back up. Your gear, cables or whatever surface it is used on will remain protected and completely undamaged.

NON-REFLECTIVE, EASY TO RIP AND TEAR– Using it on set or stage? No worries, it blends discreetly into the background and you won’t even know it’s there; need just a few inches, or several little sticks? No sweat and no scissors needed here. Very easily rips in two, three, four or more. This a strong, tough, cotton cloth pressure-sensitive tape with strong adhesive properties. water will not penetrate through the tape.

SO MANY USES AROUND THE HOUSE, ESSENTIAL TO ANY TOOLBOX – The uses are endless; secure your computer, TV or any other cables down to the floor and out of harms way; tape doors and windows to prevent drafts, secure boxes, fix appliances; Gaffer Power has hundreds of uses around the home, workshop, garden…it’s even used for boat and car repairs.

PREMIUM GRADE TAPE OR YOUR MONEY BACK. We are so confident that our Premium, American made Gaffer tape will exceed your expectations that we are offering you a full money back guarantee if you aren’t 100 percent satisfied. Order with total peace of mind. **Save on multiples, See savings below*

Insulating Aluminum Tape that is optimized for extreme humidity and temperatures from -25°C to 190°C (-13F to 374F).

Residue-free and quick-release adhesive liner enables the AVERAGE AMERICAN with LITTLE TO NO EXPERIENCE in repair to produce PROFESSIONAL-GRADE sealing, both in looks and functionality.

Facilitates better energy insulation, making this aluminum foil tape ideal for insulation, heat sinks, AC-units, ducting joints, heaters and vents.

Conformable and pressure sensitive reflective foil tape adhesive enables it to fit on corrugated joints. Bonds excellently to metal, plastic, copper, ceramic and concrete.

This Metallic Furnace Duct Tape for HVAC and duct work is ideal for sealing hot and chilly air ducts, repairing seams and insulating duct pipes. Excellent vapor and temperature barrier.

Industrial-grade Aluminum Reflective Foil Tape equipped with high-heat capacity epoxy resin and quick-release silicone adhesive liner. Withstands extreme humidity and temperature from -30°C to 180°C.

This Metallic Furnace Duct Tape for HVAC is ideal for sealing hot and chilly air ducts, repairing metal seams and insulating aluminum duct pipes.

Increases temperature efficiency, making this dryer foil tape ideal for insulation, heat sinks, AC-units, heaters and vents. Heavy-duty performance against flame, moisture, weather, corrosion and rusting.

This adhesive aluminum tape provides excellent bond on metals, plastics, copper, ceramic and concrete. Conformable and pressure sensitive adhesive enables it to fit on corrugated joints and irregular corners.

Excellent flame retardant and vapor barrier. Can be stored at any environment without degrading, making this aluminum duct tape ideal for window type AC and heaters, vents and ducting.

THE GAFFER POWER BRAND IS PREMIUM GRADE, PROFESSIONAL GAFFER TAPE our tape is made specifically for the industry professional. Many gaffer tapes are imported and low quality grade. Not Ours. GAFFER POWER IS MADE IN THE USA and were proud to say its the highest quality on the market.

SERVING THE INDUSTRY PROFESSIONAL for decades; Film and TV Shoots, Studio filming, Theatre/Stage Production, Automotive industry, Sports Productions, Churches, Film Schools, Broadcasting Classes, Box-Sealing, Lighting & Audio/Visual Technicians, Photography, Floor Marking, holding down wires to podiums, Musical Gear, Microphones/Guitar Cables, Straps, Drums, Drum Sticks, Mixing Boards and Consoles

PERFECT FOR LABELING - our white professional tape is ideal for markers and labeling your equipment. It stays securely on what its applied to but easily comes off without leaving a sticky residue. MANY HOUSEHOLD USES; secure computer or lamp cables, great for yard work, hockey sticks, window drafts, wall cracks, bug holes, you name it, Gaffer Power can do it. BETTER THAN DUCT TAPE, GAFFER POWER uses a natural rubber adhesive that leaves no residue when pulled off.

MANY HOUSEHOLD USES; secure computer or lamp cables, great for yard work, hockey sticks, window drafts, wall cracks, bug holes, you name it, Gaffer Power can do it. BETTER THAN DUCT TAPE, GAFFER POWER uses a natural rubber adhesive that leaves no residue when pulled off.

PREMIUM GRADE TAPE OR YOUR MONEY BACK. We are so confident that our Premium, American made Gaffer tape will exceed your expectations that we are offering you a full money back guarantee if you arent 100 percent satisfied. Order with total peace of mind. **Save on multiples, See savings below*

Stops leaks from hot air ducts

Heat resistant up to 600° F

Helps reduce heating costs

Measures 1.5 in x 5 yd

Made in the USA

Heat resistant to 600 degrees Fahrenheit

1.5 in. x 15 ft. roll

Stops leaks from hot air ducts

Heat resistant up to 600° F

Helps reduce heating costs

Each Package Measures 1.5 in x 5 yd

Made in the USA