10 Best Mini Wind Turbine Generator in 2022

12/24V Autodetect 400W BreezePro Wind Turbine with Embedded Controller and Integrated Dump Load

6 Blade Design for Better Light Wind Performance, Industrial Strength, 112MPH Wind Survivability

Integrated Dump Load for Stable Battery Charging and Speed Control

Startup Wind Speed 2.1m/s (4.5mph); 10.5kg (23lb) Weight and 2 years Warranty from the manufacturer

Applications: Battery Charging Applications; Surveillance Cameras; Wireless Base Stations; Electric Gate Openers, Electric Fences; Street Lamps and Signs; Remote Cabins and buildings; Boats, RV’s and static caravans; Security Systems

This is a Micro 3 phase Brushless AC Generator Model

This is a great way to teach or learn about generating electricity or as an experiment starting place for larger projects.

Output voltage : 3V-24V; Output current : 0.1A-1A;

Rated speed : 300-6000 rev/min; Rated power : 0.5-12W;

Designed Beginner Kit: 6 PCS mini dc motor, 6 PCS Motor Mounting Bracket Holder and 3 PCS different colors 4 Vanes shaft propellers and 3 PCS 3 Vanes shaft propellers

Parameter: Different voltages correspond to different speeds. Voltage: DC 3V, rated speed: 1500 RPM, voltage: DC 4.5V, rated speed: 2500 RPM, voltage: DC 12V, rated speed: 6500 RPM. Color: silver. Motor Body Diameter: 24mm/0.94"

Two-way Conversion: When the bearing rotates, it generates electricity, when receiving power, the bearing will rotate. This mini wind generator set enables the conversion of kinetic and electrical energy

Good Gift: This learning toy is good for curious kids, let the children know the driving principle of the motor, how the propeller rotates to produce wind. Cultivate children's practical ability, so that knowledge is no longer theoretical

Warning: Suitable for 8+ years, please see the picture carefully, use the correct circuit diagram to avoid short circuit, short circuit will produce high temperature and cause the battery holder case to melt and burned, the kids must use under the supervision of adults

It is a micro motor wind turbine generator.

Ideal for teaching demo.

Color:Silver;Voltage:DC 3V;Rated Speed:1500 RPM;Voltage:DC 4.5V;Rated Speed:2500 RPM;Voltage:DC 12V;Rated Speed:6500 RPM;

Motor Body Diameter:24mm/0.94";Motor Height:22.21mm/0.87"Shaft Size:8.25x2.0mm/0.32"x0.08";Line length:14cm/5.51in

Small and very good for demonstration,Good teaching tool of wind power generating

Good choice for teaching physical DC wind power generation principle.

As the model is packaged by completely accessory sets ,you need to assemble by yourself ,just enjoy the DIY fun .

Advanced design ,high utilization rate of wind energy, no matter where the wind blows ,it can be powered by the wind.

Small size, no noise,good demonstration effect, is a very good demonstration tool for DC wind power generation and DIY science education experiment.

Great teaching tool to develop children's hands-on ability and develop interests.
PS :Please note that it is just for testing and teaching use ,no actual use . In order to improve the display effect ,the turbine need to be powered by the fan or blow dryer on it at just the right angle instead of the natural wind .

1.(-Wind Turbine controller-): Wind charge controller can be used for 0-600w wind turbine. It helps to control wind generator charge battery automatically. When the battery is fully charged, brake can be taken effect automatically by the interior circuit. When the battery voltage drops to restore voltage level, wind turbine can recover to charge battery automatically. So wind controller to protect the wind turbine and the battery.

2.(-Automaticity-): This wind turbine controller can auto match 12/24 system. Voltage and current limiting are be controlled during recharging to ensure the best charging effect. Meanwhile, it provides the maximum protection to the wind turbine and battery.

3.(-Connection-): Unique reverse connect protection circuit. For improper operation of positive and negative electrode, user don't need to replace the fuse, only to reset the positive and negative in correct point. Make the whole system will be more reliable.

4.(- Good heat dissipation-): Wind generator charge controller use Aluminum alloy shell and Therming Dissipine Structure with good Heat Dissipation. The rectification and brake circuit part has adopted integrated module design, whatever heat dissipation or reliability, all further advanced than the traditional design.

5. (-Protection-) The fully waterproof protection which grade reach into IP67 above. Charge controller can work steadily even in very humid environment. Also including Lightning protection, automatic over-voltage braking, battery reverse connection and open protection.

Good choice for teaching physical DC wind power generation principle.

As the model is packaged by completely accessory sets ,you need to assemble by yourself ,just enjoy the DIY fun .

Advanced design ,high utilization rate of wind energy, no matter where the wind blows ,it can be powered by the wind.

Small size, no noise,good demonstration effect, is a very good demonstration tool for DC wind power generation and DIY science education experiment.

Great teaching tool to develop children's hands-on ability and develop interests.
PS :Please note that it is just for testing and teaching use ,no actual use . In order to improve the display effect ,the turbine need to be powered by the fan or blow dryer on it at just the right angle instead of the natural wind .

PRODUCT DATA--Rated Power: 0.55 W Output Voltage: 5.5 V 4-Vane, diameter of Fan(installed): 100mm Rated Wind Speed: 5.5 m/s

Complete product: It needs youself to assemble the wind turbine generator model kits,you can enjoy the fun of DIY.

MINI size:Small and very good for demonstration,can be used as a wind power teaching experiment. Great to cultivate students and kids hands-on ability.

360° Rotatable: You can convert 360 degree at any angle, and it will automatically face the wind direction.

LOW ENERGY CONSUMPTION: Power generation LED light, low power consumption of LED required,under a fan is enough to get the power to light the LED.

Input: three-phase alternating current；Output: single—phase DC constant current；Rated power: 500 watt Peak power: 750 watt

The CD5.0 wind turbine controller is used to rectify the three-phase alternating current produced by wind turbine to single—phase DC constant current then charge the battery.

It monitors the generator system to protect the battery’s overcharge.

The CD5.0 controller is designed with an electromagnetic brake safety function to prevent the wind turbine’s blade running faster when the wind is much stronger.

Note: Always connect the controller to the battery before you connect it to the wind turbine. This model is 24V. Please check the voltage of your existing wind turbine to use the proper controller. The controller will be burnt easily if there is no battery in whole system. 

🔆High-Quality and Durable- The wind turbine motor adopts a three-phase AC permanent magnet synchronous generator, free running, low noise and long service life. Teflon wire is heat resistant, which is not easy to damage the wire when the machine is overloaded. It is smooth in operation, good wind resistance for double-row bearing.

🔆High-Quality 5 Blades of Wind Turbine Generator-The blade is equipped with a copper inlay part that does not damage the nylon fiber when the bolt is tightened, the blades are not easily deformed or broken. The working temperature is -40 ° C ~ 80 ° C, do not worry about the temperature being too low and causing the leaves to freeze.

🔆Excellent Heat Resistance-The coil is made of Teflon wire, which is resistant to high temperatures. It has effective regulation of current and voltage, low start-up speed but high wind energy utilization factor, which contributes to the annual energy output.

🔆Unique Design- The wind turbine generator adopts a permanent magnet rotor alternator and with a special kind of stator design, efficiently decreases resistance torque. And the wind turbines match the generators quite well, the blade is designed with aerodynamics to make the rotor run smoothly, quietly and with high wind energy utilization factor.

🔆Wide Application-This wind turbine generator is easy to install and maintain, which is suitable for the leisure sector and is known for charging batteries for boats, gazebos, cabins or mobile homes, as well as for green windmills, home, corporate and industrial energy supplements!